Acelerador ESC 100A (OPTO)

$58.000

ESC 100A Brushless Motor Speed Controller

Constant current 100A Max 125A <10s
Li-Poly 2-7 cells; Ni-MH 6-27 cells
Low resistant 0.0010 ohms
Dynamic braking
BEC: No
Auto shut down when lose signal
Slow down at 3.0V per cell Lipo,Cut-off at 2.9V per cell Lipo 0.8V Nim

 

• Programmable LiPo or NiMh cutoff
• Programmable brake
• Low resistance

This ESC is a great match for large motors that draw up to 80 amps.

Nota: No incluye manual.

Hay existencias

 ESC 100A Brushless Motor Speed Controller

Constant current 100A Max 125A <10s
Li-Poly 2-7 cells; Ni-MH 6-27 cells
Low resistant 0.0010 ohms
Dynamic braking
BEC: No
Auto shut down when lose signal
Slow down at 3.0V per cell Lipo,Cut-off at 2.9V per cell Lipo 0.8V Nim

User programming options

Battery Setting
Throttle Range
Brake Setting 4 options
Direction and Cutoff Type
Timing Mode Setting: 1º /7º /15º/30º
PWM Setting: 8K/16K

Important Note: this ESC is Opto, without BEC supplying power to your Receiver, you need extra power source for your receiver. You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver. If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.

Nota: No incluye manual.

Peso 0.001 kg
Dimensiones 1 x 1 x 1 cm

Valoraciones


No hay valoraciones aún.

Be the first to review “Acelerador ESC 100A (OPTO)”