RC Drone, calidad a precio justo

Digital Micro 11g Servo TS-D9018Metal Gear

$12.000

Control System: Positive PWM control 1500 usec Neutral
Operation Voltage Range: 4.8V ~ 6.0V
Operation Temperature Range: -20C°~ +60C°
Test Voltage:                At 4.8V                                          At 6.0V
Standing Torque           1.5kg.cm                                         1.8kg.cm
Speed              0.10 sec / 60 deg at no load           0.08sec / 60 deg at no load
Idle Current                 200mA at stopped                            250mA at stopped
Running Current:         260mA at no load                            320mA at no load
Dead band width:        3 usec                                               3 usec
Circle:                          15000 times
Operation Travel:         60°±10°
Direction:                     Re-clock wise/ Pulse Travel 1500 to 1900 usec
Driver type:                  FET drive
Motor Type:                 Metal gear
Potentiometer Type    Indrect drive
Amplifier Type            Digital Control
Dimensions:               23*12.1*25.8 mm
Weight:                       11g without splined horn
Ball Bearing:              NO
Gear Material:           Metal
Case Material           POM
Connector Wire Length:  180mm
Connector Wire Gauge: 26AWG heavy duty(Futaba Univeral)
Wire Info (Brown):    Negative
Wire Info (Red):       Positive
Wire Info (Orange):  S Single

Package: 1 pcs

 

Hay existencias

Categorías: ,

Digital Micro 11g Servo TS-D9018MG

Control System: Positive PWM control 1500 usec Neutral
Operation Voltage Range: 4.8V ~ 6.0V
Operation Temperature Range: -20C°~ +60C°
Test Voltage:                At 4.8V                                          At 6.0V
Standing Torque           1.5kg.cm                                         1.8kg.cm
Speed              0.10 sec / 60 deg at no load           0.08sec / 60 deg at no load
Idle Current                 200mA at stopped                            250mA at stopped
Running Current:         260mA at no load                            320mA at no load
Dead band width:        3 usec                                               3 usec
Circle:                          15000 times
Operation Travel:         60°±10°
Direction:                     Re-clock wise/ Pulse Travel 1500 to 1900 usec
Driver type:                  FET drive
Motor Type:                 Metal gear
Potentiometer Type    Indrect drive
Amplifier Type            Digital Control
Dimensions:               23*12.1*25.8 mm
Weight:                       11g without splined horn
Ball Bearing:              NO
Gear Material:           Metal
Case Material           POM
Connector Wire Length:  180mm
Connector Wire Gauge: 26AWG heavy duty(Futaba Univeral)
Wire Info (Brown):    Negative
Wire Info (Red):       Positive
Wire Info (Orange):  S Single

Package: 1 pcs

 

 

 

Valoraciones


No hay valoraciones aún.

Be the first to review “Digital Micro 11g Servo TS-D9018Metal Gear”